IMPULSETM High-Average-Power Femtosecond Laser
IMPULSETM is an all-diode-pumped, direct-diode-pumped Yb-doped fiber oscillator/amplifier system capable of producing variable pulse energies up to 10 microjoules at user-selectable repetition rates between 200 kHz and 25 MHz1. With 20 Watts average power output at 2 MHz, IMPULSETM offers is more than an order-of-magnitude higher than has traditionally been available in a one-box ultrashort pulse laser design.
IMPULSETM is based on a revolutionary new concept in mode-locked oscillator/amplifier technology. The use of a Yb-doped fiber-oscillator/fiber-amplifier design combines the low noise performance associated with solid state operation with the high spatial mode quality of fiber lasers.
IMPULSETM is a compact, robust, one-box source of femtosecond to picosecond pulses with the ease-of-operation, stability and reliability you would expect from a fiber source. And all its major parameters are computer controlled, which allow it to be easily interfaced to your industrial workstation or experiment. It is even iPhone/iPod2 App enabled.
Optional accessories include multi-photon photopolymerization, waveguide writing, micromachining, harmonic generation, and OPA/NOPA wavelength conversion for high S/N and rapid data acquisition in pump/probe experiments.
Direct-diode-pumped Yb-fiber oscillator/amplifier design
All-diode pumped, all-solid state construction
Robust, one-box design
>20 Watts Average Power @ 2 MHz repetition rate
Repetition rate variable from 200 kHz to 25 MHz
Complete computer control including iPhone/iPod App
High beam quality
Low noise, cw-pumped
High stability and longevity
- Direct-write waveguides
- High S/N pump/probe
- OPA/NOPA pumping
Repetition rate: User adjustable via embedded computer from 200 kHz to 25 MHz
(in increments of the oscillator repetition rate divided by a whole integer)1
Pulse energy: User adjustable via embedded computer between 100 nJ and 10 μJ
(Example: > 0.8 μJ @ 25 MHz, > 10 μJ @ < 2 MHz)
Average power output: User adjustable via computer up to 20 Watts
Pulse width: User adjustable via computer between < 250 fs and > 8 ps
Transverse mode: TEM00
M2: < 1.2 - 1.5 depending on pulse energy
Variation in pulse energy: < 1% rms
Center Wavelength: 1.03 microns
1Optional pulse picker available to adjust repetition rate in the range of 100 kHz to single shot.
2iPhone and iPod are Trademarks of Apple Inc.
Please feel free to for more information!